You can connect your instances to Ultipa Tools such as Ultipa Manager, Ultipa CLI or Ultipa Drivers to exert the full capacity of Ultipa Graph.
Prerequisites
The status of the target instance is Active.
If your instance is Stopped, start it from Action > Start.
Graph Powerhouse
Connect to Ultipa Manager Lite
On Graph Powerhouse tab, find the target cluster, and click Connect > Manager Lite.
Log in to Ulitpa Manager Lite with your Ultipa Cloud account. The first time you use Ultipa Manager Lite, a window appears prompting you to add this cluster to Ultipa Manager Lite.
Fill in the form and click Confirm.
Parameter |
Description |
|---|---|
| Hosts | Host address of the cluster is automatically populated; you don’t need to change. |
| Username | Enter "root"; the root user was created for the database when initializing the cluster. |
| Password | Enter the password of the root user. |
| Name | A custom name for this cluster to display in Ultipa Manager Lite. |
The green bar indicates that the cluster is successfully connected to Ultipa Manager Lite.
Click Open to start your work in Ultipa Manager Lite.
The first time you use Ultipa Manager Lite, a window appears prompting you to add a graphset to the cluster.
Fill in the form and click Confirm.
Parameter |
Description |
|---|---|
| GraphSet Name | Name of the graphset. |
| Shards | Specifies the shards where data will be processed. |
| Shards partition | Specifies the patitioning algorithm, including Crc32, Crc64WE, Crc64XZ and CityHash64. |
| Description | Description of the graphset. |
Note:For details about Ultipa Manager, see Ultipa Manager.
Connect to Ultipa CLI
On Graph Powerhouse tab, find the target cluster, and click Connect > Ultipa CLI to refer to the user guide of Ulitpa CLI.
Note: Ulitpa Manager Lite requires Ultipa CLI v5.0.0 or higher.
Connect to Ultipa Drivers
On Graph Powerhouse tab, find the target cluster, and click Connect > Ultipa Drivers to refer to the user guide of Ulitpa Drivers.
Note: Ulitpa Manager Lite requires Ultipa Drivers v5.0.0 or higher.
Graph Blaze
Connect to Ultipa CLI
On Graph Blaze tab, find the target instance, and click Connect > Ultipa CLI.
Enter the username "root" and your password and then connection to Ultipa CLI is completed.
Note:For details about Ultipa CLI, see Ultipa CLI.
Connect to Ultipa Manager
On Graph Blaze tab, find the target instance, and click Connect > Ultipa Manager.
Log in to Ulitpa Manager with your Ultipa Cloud account. The first time you use Ultipa Manager, a window appears prompting you to add this instance to Ultipa Manager.
Fill in the form and click Confirm.
Parameter |
Description |
|---|---|
| Hosts | Host address of the instance is automatically populated; you don’t need to change. |
| Username | Enter "root"; the root user was created for the database when setting up the instance. |
| Password | Enter the password of the root user. |
| Name | A custom name for this instance to display in Ultipa Manager. You may use the same name as the instance. |
The green bar indicates that the instance is successfully connected to Ultipa Manager.
Note: In case of changing the listening port after a successful connection to Ultipa Manager, you need to delete the existing connection that uses the previous listening port and create a new connection using the new listening port.
Click Open to start your work in Ultipa Manager.
Note:For details about Ultipa Manager, see Ultipa Manager.